home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Ham Radio 2000
/
Ham Radio 2000.iso
/
ham2000
/
satellit
/
vstsrc
/
vst.mak
< prev
next >
Wrap
Text File
|
1995-02-02
|
10KB
|
299 lines
#
# %W% %E% %U% [EXTREL_1.2]
#
# VersaTrack orbit calculations are based on those that appear in Dr. Manfred
# Bester's sattrack program (the Unix(tm) version, circa 1992).
#
# The data from which the maps where generated come from "xsat", an
# X-Windows program by David A. Curry (N9MSW).
#
# Site coordinates come from various sources, including a couple of
# World Almanacs, and also from both of the programs mentioned above.
#
# The following are authors' applicable copyright notices:
#
#
# Copyright (c) 1992, 1993, 1994 Manfred Bester. All Rights Reserved.
#
# Permission to use, copy, modify, and distribute this software and its
# documentation for educational, research and non-profit purposes, without
# fee, and without a written agreement is hereby granted, provided that the
# above copyright notice and the following three paragraphs appear in all
# copies.
#
# Permission to incorporate this software into commercial products may be
# obtained from the author, Dr. Manfred Bester, 1636 M. L. King Jr. Way,
# Berkeley, CA 94709, USA.
#
# IN NO EVENT SHALL THE AUTHOR BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT,
# SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF
# THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF THE AUTHOR HAS BEEN ADVISED
# OF THE POSSIBILITY OF SUCH DAMAGE.
#
# THE AUTHOR SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
# PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS ON AN "AS IS"
# BASIS, AND THE AUTHOR HAS NO OBLIGATIONS TO PROVIDE MAINTENANCE, SUPPORT,
# UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
#
#
# Copyright 1992 by David A. Curry
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that copyright
# notice and this permission notice appear in supporting documentation. The
# author makes no representations about the suitability of this software for
# any purpose. It is provided "as is" without express or implied warranty.
#
# David A. Curry, N9MSW
# Purdue University
# Engineering Computer Network
# 1285 Electrical Engineering Building
# West Lafayette, IN 47907
# davy@ecn.purdue.edu
#
# VersaTrack Copyright (c) 1993, 1994 Siamack Navabpour. All Rights Reserved.
#
# Permission is hereby granted to copy, modify and distribute VersaTrack
# in whole, or in part, for educational, non-profit and non-commercial use
# only, free of charge or obligation, and without agreement, provided that
# all copyrights and restrictions noted herein are observed and followed, and
# additionally, that this and all other copyright notices listed herein
# appear unaltered in all copies and in all derived work.
#
# This notice shall not in any way void or supersede any of the other authors
# rights or privileges.
#
# VersaTrack IS PRESENTED FREE AND "AS IS", WITHOUT ANY WARRANTY OR SUPPORT.
# YOU USE IT AT YOUR OWN RISK. The author(s) shall not be liable for any
# direct, indirect, incidental, or consequential damage, loss of profits or
# other tangible or intangible losses or benefits, arising out of or related
# to its use. VersaTrack carries no warranty, explicit or implied, including
# but not limited to those of merchantablity and fitness for a particular
# purpose.
#
# Siamack Navabpour, 12342 Hunter's Chase Dr. Apt. 2114, Austin, TX 78729.
# sia@bga.com or sia@realtime.com.
#
#############################################################################
#
#
# Makefile for VersaTrack.
# For a full description of legal notices please see the source files.
# This makefile is intended for use with manual invocation of the nmake util.
# (as opposed to using it through WIN SDK or equivalent)
#
# VALID MAKE TARGETS ARE:
# <null> : build and leave results in current directory.
# all or test : same as <null>.
# install : build in current directory and install in $(INSTALLDIR)
# clean : clean up .obj's and other files that can be built from
# sources - .map files are not deleted.
# clobber : clean up and also remove the executables, .dll's, and .map's.
# backup : copy all source files to floppy in A:
# zip : archive all source files in a .zip file. Includes all the
# makefile, resource files, icons, etc. PKZIP must be accessible
# for this to work.
#
#
PROJ = vst
EXENAME = versatrk
DLLNAME = dbread
DEBUG = 0
INSTALLDIR = \vst
#
## Define CVER = -DWINNT_31 if to be run under windows nt 3.1
#
CVER =
MAKE = nmake -e
CC = cl
CPP = cl
RC = rc
.SUFFIXES: .dib .map
CFLAGS_D_WEXE = -nologo -W3 -D_X86_ -D_DEBUG_ -D_WINDOWS -DWIN32 $(CVER)
CFLAGS_R_WEXE = -nologo -W3 -D_X86_ -DNDEBUG -D_WINDOWS -DWIN32 $(CVER)
# can we set debugtype to coff? elf? dwarf?
LFLAGS_D_WEXE = -nologo -map -debug -debugtype:cv -subsystem:windows
LFLAGS_R_WEXE = -nologo -map -subsystem:windows
LFLAGS_D_LIB = -nologo
LFLAGS_R_LIB = -nologo
LIBS_D_WEXE = user32.lib gdi32.lib advapi32.lib wsock32.lib
LIBS_R_WEXE = user32.lib gdi32.lib advapi32.lib wsock32.lib
D_RCDEFINES = -D_DEBUG_
R_RCDEFINES = -DNDEBUG
RCFLAGS = -D_WINDOWS -DWIN32
MAKEFLAGS = L E
CC_D_OPTIM = -Ox
CC_R_OPTIM = -Ox
!if "$(DEBUG)" == "1"
OBJS_EXT = $(OBJS1) $(OBJS_DEBUG)
CFLAGS = $(CFLAGS_D_WEXE) $(CC_D_OPTIM)
CFLAGSX = $(CFLAGS_D_WEXE)
LFLAGS = $(LFLAGS_D_WEXE)
LIBS = $(LIBS_D_WEXE)
LFLAGS_LIB = $(LFLAGS_D_LIB)
RCDEFINES = $(RCFLAGS) $(D_RCDEFINES)
!else
OBJS_EXT = $(OBJS1)
CFLAGS = $(CFLAGS_R_WEXE) $(CC_R_OPTIM)
CFLAGSX = $(CFLAGS_R_WEXE)
LFLAGS = $(LFLAGS_R_WEXE)
LIBS = $(LIBS_R_WEXE)
LFLAGS_LIB = $(LFLAGS_R_LIB)
RCDEFINES = $(RCFLAGS) $(R_RCDEFINES)
!endif
OBJS1 = \
init.obj \
dialogs.obj \
satsite.obj \
rtd.obj \
select.obj \
compute.obj \
vstnute.obj \
vstsgp4.obj \
vstsqnt.obj \
vstdate.obj \
track.obj \
rst.obj \
util.obj \
rotator.obj \
colors.obj \
error.obj
OBJS_DEBUG = prf.obj
DEPS = \
vstdefs.h \
vsttype.h \
vstextrn.h \
vstdib.h
LIBS_EXT =
MAP1 = world86.map
MAP2 = world64.map
MAP3 = usa86.map
MAP4 = usa64.map
MAPS = $(MAP1) $(MAP2) $(MAP3) $(MAP4)
all test: the_dll $(EXENAME).exe $(MAPS)
the_dll:
@cd lib
@$(MAKE) "DEBUG=$(DEBUG)" "CVER=$(CVER)" "INSTALLDIR=$(INSTALLDIR)"
@cd ..
#gendate.exe: gendate.c $(DEPSS)
# $(CC) $(CFLAGS) gendate.c -o gendate.exe
# -@del gendate.obj
mapadj.exe: mapadj.c vsttype.h
$(CC) -nologo -Ox mapadj.c
-@del mapadj.obj
vst.obj: vst.c $(DEPS) resource.h
prf.obj: prf.c $(DEPS)
dialogs.obj: dialogs.c $(DEPS) resource.h
compute.obj: compute.c $(DEPS)
vstsgp4.obj: vstsgp4.c $(DEPS) vstprop.h
vstnute.obj: vstnute.c $(DEPS)
vstsqnt.obj: vstsqnt.c $(DEPS)
satsite.obj: satsite.c $(DEPS) resource.h
select.obj: select.c $(DEPS)
vstdate.obj: vstdate.c $(DEPS)
rtd.obj: rtd.c $(DEPS) resource.h
rst.obj: rst.c $(DEPS) resource.h
util.obj: util.c $(DEPS)
track.obj: track.c $(DEPS)
error.obj: error.c
rotator.obj: rotator.c $(DEPS)
$(CC) $(CFLAGSX) -c $*.c
init.obj: init.c $(DEPS)
colors.obj: colors.c $(DEPS) resource.h
error.obj: error.c
$(PROJ).res: vst.rc resource.h
$(RC) $(RCDEFINES) -r vst.rc
$(MAPS): mapadj.exe
.c.obj:
$(CC) $(CFLAGS) -c $*.c
.dib.map:
mapadj $*
$(EXENAME).exe: $(PROJ).res vst.obj $(OBJS_EXT) $(LIBS_EXT)
echo >NUL @<<$(PROJ).inp
vst.obj
$(OBJS_EXT)
$(PROJ).res
-out:$(EXENAME).exe
$(LIBS)
$(LIBS_EXT)
$(DEFFILE_OPTION) -implib:$(PROJ).lib
<<
link $(LFLAGS) @$(PROJ).inp
clean:
-@del *.obj $(EXENAME).map *.res *.pch *.sbr *.aps *.log >NUL 2>NUL
@cd lib
@$(MAKE) clean
@cd ..
clobber: clean
-@del $(EXENAME).exe gendate.exe mapadj.exe $(DLLNAME).dll >NUL 2>NUL
-@del $(MAPS)
@cd lib
@$(MAKE) clobber
@cd ..
install: $(INSTALLDIR)\$(EXENAME).exe $(INSTALLDIR)\$(DLLNAME).dll \
$(INSTALLDIR)\$(MAP1) $(INSTALLDIR)\$(MAP2) $(INSTALLDIR)\$(MAP3) \
$(INSTALLDIR)\$(MAP4)
copy $(EXENAME).exe $(INSTALLDIR)\*.* /v
copy $(DLLNAME).dll $(INSTALLDIR)\*.* /v
copy $(MAP1) $(INSTALLDIR)\*.* /v
copy $(MAP2) $(INSTALLDIR)\*.* /v
copy $(MAP3) $(INSTALLDIR)\*.* /v
copy $(MAP4) $(INSTALLDIR)\*.* /v
copy doc.txt $(INSTALLDIR)\*.* /v
copy *.dat $(INSTALLDIR)\*.* /v
backup:
@backup.bat a:
zip:
@srczip.bat
## End of Makefile